Noise colours are not brands or marketing categories. They describe how energy is distributed across frequencies. Once you know the shape, the practical difference between white, pink and brown noise becomes obvious the first time you hear them side by side.
White noise: equal energy everywhere
White noise has the same energy at every frequency, from the bottom of the audible range to the top. That flat distribution is why it sounds bright and slightly hissy: your ear is more sensitive in the upper midrange, so the high frequencies dominate the impression even though the energy is technically equal.
It is good at masking. A fan, an air conditioner, or a recording of rain all contain a broad spread of frequencies, and white noise covers that spread well. The downside is that the hiss itself can become the thing you notice, especially at low volume in a quiet room.
Pink noise: less energy as frequency rises
Pink noise drops by about 3 dB per octave. In plain terms, each doubling of frequency carries half the energy of the octave below it. The result is a spectrum tilted toward the low end, which sounds more natural and less sharp than white noise.
Most environmental sounds sit closer to pink than white. Steady rain, wind through trees, and distant traffic all have that downward tilt. That is why rain recordings feel softer than a pure white-noise generator even when both are masking the same room.
In this archive, the rain and surf layers are built from pink noise. The bandpass filter then narrows the result to the range where rain on glass sits, which is roughly 1 to 1.5 kHz. The noise colour sets the character; the filter sets the scene.
Brown noise: much more energy at the bottom
Brown noise falls off faster, around 6 dB per octave. The high frequencies are almost gone, and what remains is a dense low rumble. It sounds like a distant waterfall or a heavy blanket, and it is the colour most people mean when they say a sound is “deep”.
Brown noise is the base of the sleep pillar here. A low lowpass filter removes the last of the hiss, leaving something felt more than heard. That is useful when you want to mask a room without adding a bright layer that keeps light sleepers alert.
Which one should you pick
If the problem is a noisy room and you need to cover speech or traffic, white or pink noise does the job. If the problem is your own attention and bright sound is distracting, brown noise is usually easier to live with for hours.
There is no correct answer in the abstract. The useful test is ten minutes at the volume you would actually use. If you find yourself listening to the noise instead of ignoring it, the colour is wrong for the task.
Hear the difference
The sleep pillar uses brown noise as its base, while rain and surf use pink. If you want to compare directly, start with a sleep seed and then a rain seed at the same volume.