Guides
White Noise for Babies: Volume, Distance and Safety
White noise is widely used to settle babies, and the practical rules are simple: keep it quiet, keep it away from the cot, and keep it short. The sound that helps a baby fall asleep is a low, steady wash — not a phone speaker at arm’s length. This article covers what to use, how loud, where to put it, and what to avoid. It is general information, not medical advice; if your baby has reflux, breathing issues or hearing concerns, ask your paediatrician first.
Why white noise works on babies
Newborns have spent nine months with a constant low-frequency wash — heartbeat, blood flow, muffled voices. Absolute silence is the unfamiliar state, not the familiar one. A steady broadband sound recreates some of that and, more usefully, masks the small sounds that wake a light-sleeping baby: a door, a stair, a sibling.
That is the whole mechanism. It is not a sedative and it does not “train” sleep. It removes interruptions.
Volume: the number that matters
The figure usually cited in paediatric guidance is around 50 dB at the baby’s head — roughly the volume of a quiet shower, or a soft conversation across a room. That is much quieter than most parents expect. A phone playing white noise at full volume, held near the cot, can be far above that.
A practical way to calibrate without a meter: stand where the baby sleeps, close your eyes, and check whether the sound is loud enough that you would have to raise your voice to talk over it. If yes, turn it down. It should sit behind the room, not in front of it.
If you do want a number, a cheap sound level meter app on your phone, held at the cot mattress, will get you within a few dB — enough to catch the obvious mistakes.
Distance and placement
- Across the room, not in the cot. Mounting a speaker or phone on the cot rail puts the source centimetres from the baby’s ear for hours.
- Never inside the sleep space. No devices, cables, or anything with a battery loose in the cot.
- Aim at a wall. Pointing the speaker at a nearby wall softens the top end and fills the room more evenly than pointing it at the baby.
- Fixed, not handheld. A device that can be knocked or pulled is a hazard. Put it on a shelf or a dresser the baby cannot reach.
How long to run it
Many families run white noise for the whole nap or night; others use it only to settle and then fade it out. Both are common. What matters is the level, not the duration, and a timer or fade gives you a middle option: the baby falls asleep with the sound, and it is gone by the time they are in deep sleep.
If your baby wakes the moment the sound stops, that is a sign the level is too high or the transition is too abrupt — extend the fade rather than turning it up.
White, pink or brown?
White noise has energy at every frequency and sounds bright. Pink rolls off gently and sounds like rain. Brown rolls off steeply and sounds like a waterfall or a distant motorway.
For babies, the usual advice is to lean towards pink or brown: the top end of white noise is the part most likely to be harsh at close range, and low-frequency sound travels less sharply. Some babies clearly prefer the brighter texture, and there is no rule that says otherwise. Try one, then the other, at the same low volume.
The sleep pillar has brown noise and low lullaby engines; the nature pillar has rain and surf, which sit closer to pink. Both are good starting points if you want to compare textures without an app full of ads.
What to avoid
- Phone speakers at close range. Small speakers distort, and distortion adds harsh high frequencies.
- Apps with ads or auto-playing tracks. A sudden louder ad at 2am is worse than no sound at all.
- Anything that needs the phone unlocked to keep playing. Screens in a dark room are their own problem.
- Volume “to cover the crying”. The sound should mask the room, not the baby.
Does it create a dependency?
Some parents worry that the baby will need noise forever. In practice, most children drop it naturally as their sleep consolidates, and the alternative — a baby waking to every door — is usually worse in the short term. If you want to reduce reliance later, lower the volume gradually over a few weeks rather than removing it overnight.
A simple setup that works
- Small speaker on a shelf, two metres or more from the cot, angled at a wall.
- Volume set at the cot with a meter app: aim for the quiet-shower level, and err lower.
- Start the sound at bedtime, not after the baby is already asleep.
- Use a fade so the sound tapers off rather than cutting out.
- Re-check the level any time the room changes — a new shelf, a new cot position, a new baby.
Frequently asked questions
Can white noise damage a baby’s hearing?
At low volume and at a distance, it is not considered a risk. The concern in the literature is about loud, close sources — phones in the cot, speakers at full volume. Keep it quiet, keep it away, and the question largely goes away.
Should the white noise be on all night?
Either is fine. All night is more effective at masking; a timer with a long fade is gentler. Pick one and keep it consistent, because a changing soundscape at 3am is itself a wake-up trigger.
Is it safe to leave a phone in the room?
A phone on aeroplane mode, on a shelf, is not a hazard in itself. A phone in the cot, or charging under the mattress, is. If you can avoid the phone entirely — a small dedicated speaker is better.
If you want a sound you can leave running without ads or interruptions, the archive generates its audio in the browser: nothing streams, nothing downloads, and there is no advertising layer. Start with the sleep pillar and compare a brown noise seed against a lullaby one at the same low volume.
More guides
- Nature Sounds vs White Noise for Focus White noise masks a room; nature sounds give attention somewhere to rest. Pick by what is…
- How Long Should a Sleep Sound Session Run? Five minutes to start, eight hours to stay asleep. Match the timer to the noise in…
- Why Looped Sleep Audio Starts to Annoy You A seam, a repeated dog, a trackable tone, or volume creep. Four reasons a sleep sound…